2.1 Front panel
Nr Description Status Status Explanation
A Power LED OFF Power is OFF
ON - GREEN Power is on and the initialization is normal
ON - RED Device is initiating
ON - FLASHING Firmware is upgrading
B ADSL LED OFF Initial self test failed
ON – FLASHING Device is detecting DSL signal
ON - STEADY DSL signal detected, self test succeeded
C Internet LED ON - Red No DSL connection
ON - Green Internet connection available
D LAN LEDs OFF LAN port is not connected
(1, 2, 3, 4) ON - STEADY A device is connected to the LAN port
ON - FLASHING Data is being transmitted
E WLAN LEDs OFF Wireless LAN is turned off
ON - STEADY Wireless LAN is active and normal
ON - FLASHING Wireless LAN activity (sending or receiving data)
F WPS LED OFF WPS (Wi-Fi Protected setup) not active
ON - FLASHING WPS active, new WLAN clients can be added
ON – STEADY WPS client successfully added
To Next Page
Loading...