CONCEPTRONIC C150APRA2 ENGLISH
91
5.5.3.2 Management – Access Controls – Services
In the ACCESS CONTROLS page, click Services. The page as shown in the following figure appears:
In this page, you can enable or disable the services that are used by the remote host. For example,
if telnet service is enabled at port 23, the remote host can access the device by telnet through port
23.
Select the management services that you want to enable or disable at the LAN or WAN interface and
click Apply to apply the settings.
Caution: If you disable the HTTP service, you cannot access the configuration page of the
device any more.
To Next Page
Loading...