Conceptronic CHD3SU - Using Your Harddisk Box; Connect CHD3 SU to Computer; Safely Disconnect Harddisk Box

ENGLISH
6
2. Using your harddisk box
2.1 Connect the CHD3SU to your computer
• Connect the power supply to the CHD3SU and to a free wall outlet.
• Connect the USB cable to the CHD3SU and to a free USB port on your computer
• Turn on your computer.
• Turn on the CHD3SU with the power switch on the backside.
The computer will automatically recognize and install the CHD3SU. No driver installation is required.
2.2 Disconnect the CHD3SU from your compute
The CHD3SU must be removed safely before you disconnect it from your computer, in order to prevent
data loss.
• Double click on the “Safely Remove Hardware” icon in your system tray.
The “Safely Remove Hardware” window will be shown.
• Click on the connected CHD3SU (often listed as “USB Mass Storage Device”) and click the “Stop”
button.
• Confirm the disconnection by clicking “OK”.
The CHD3SU is now safely removed from your computer. You can now disconnect the CHD3SU.