Conceptronic CMED3PLUS - User Manual

Copyright
®
2007 by Conceptronic – All rights reserved
www.conceptronic.net
Page 1 of 7
Conceptronic CMED3PLUS Firmware Upgrade Instructions
for firmware version: 1.54B / MP07T031408A
A. Upgrade information
The Conceptronic CMED3PLUS is equipped with an upgradeable firmware chip. This function makes it
possible to improve the device and to add new features.
Note: This firmware upgrade for the CMED3PLUS can only be applied to devices with firmware version
1.54 (MP07T022408A) or higher. If you have a lower version you need to upgrade to version
1.54 before you can apply this firmware upgrade.
Note: The firmware upgrade procedure is at your own risk. Even though a firmware upgrade can
improve the device and add new features, there’s also a possibility of an upgrade failure which
makes the device unusable. Conceptronic is not responsible for this and this voids the warranty.

Conceptronic CMED3PLUS Specifications

General

Category	Media Player
Card Reader	Yes
USB ports quantity	2
HDMI ports quantity	1
Composite video out	Yes
Component video (YPbPr/YCbCr) out	Yes
Digital audio coaxial out	Yes
Ethernet LAN	Yes
Wi-Fi	No
Output Resolution	1080p
Supported memory cards	MMC, SD
Video formats supported	AVI, MP4, MKV, MOV, MPG, DAT, RM, RMVB, WMV
Audio formats supported	MP3, WMA, WAV, OGG
Image formats supported	BMP
Subtitle formats supported	SRT, SUB
Connectivity	USB, HDMI, Ethernet