Copyright
®
2008 by Conceptronic – All rights reserved
www.conceptronic.net
Page 1 of 7
Conceptronic CSM3PL Firmware Upgrade Instructions
for firmware version 1.58D BETA
A. Upgrade information
The Conceptronic CSM3PL is equipped with an upgradeable firmware chip. This function makes it
possible to improve the device and to add new features.
Note: This firmware upgrade for the CSM3PL can only be applied to devices with firmware version
1.54 (MP07ST022408A) or higher. If you have a lower version you need to upgrade to version
1.54 before you can apply this firmware upgrade.
Note: The firmware upgrade procedure is at your own risk. Even though a firmware upgrade can
improve the device and add new features, there’s a small possibility of an upgrade failure
which makes the device unusable.
To Next Page
Need help?
General
