Name: Conceptronic Grab’n’GO 3,5”
Brand: Conceptronic
Rating: 4 (1 reviews)

To Next Page

www.conceptronic.net

Page 1 of 7

Conceptronic CMED3PLUS Firmware Upgrade Instructions

for firmware version: 1.54B / MP07T031408A

A. Upgrade information

The Conceptronic CMED3PLUS is equipped with an upgradeable firmware chip. This function makes it

possible to improve the device and to add new features.

Note: This firmware upgrade for the CMED3PLUS can only be applied to devices with firmware version

1.54 (MP07T022408A) or higher. If you have a lower version you need to upgrade to version

1.54 before you can apply this firmware upgrade.

Note: The firmware upgrade procedure is at your own risk. Even though a firmware upgrade can

improve the device and add new features, there’s also a possibility of an upgrade failure which

makes the device unusable. Conceptronic is not responsible for this and this voids the warranty.

Other manuals for Conceptronic Grab’n’GO 3,5”

Questions and Answers:

Need help?

Do you have a question about the Conceptronic Grab’n’GO 3,5” and is the answer not in the manual?

General