ENGLISH
22
2 The CH3SNAS Explained
Front View Front inside view Back view
Nr Description Explanation
1. Power LED/ The steady Blue light indicates the server is powered on.
Button Press once to power on. Press and hold the button for 5 seconds to
power off
2. HDD1/2 LED The steady Blue light indicates the hard disk drive(s) is connected
but inactive. When it blinks, the hard disk drive(s) is
reading/writing data. The steady Orange light indicates the hard
disk drive(s) failed.
3. LAN LED The steady Blue light confirms that the server has a good
connection to your network. When it blinks, the storage server is
receiving/transmitting data from/to the network.
4. HDD Eject Lever Use the lever(s) to eject the installed hard disk drive(s). The front
panel must be removed before ejecting the hard disk drive(s).
5. Power Connector Connect the provided AC power adapter.
6. Reset Button Press and hold for 5 seconds to restore the default setting.
7. LAN Port Connect the server to the local network through the Ethernet cable.
8. USB Port Connect a USB printer.
1
2 3
2
4
5 6 7
2 1
4
8
To Next Page
Loading...