ENGLISH
30
4.4 Wizard Configuration
When the Harddisk configuration is completed and the CH3SNAS is rebooted, you will
enter the main menu of the Web configuration.
The CH3SNAS provides a setup wizard that allows you to quickly configure some of the
basic device settings.
1. Click the button “Run
Wizard”.
2. The welcome screen lists
five steps of the wizard.
Click “Next” to continue.
3. You are recommended to
set an admin password
here. Enter the new
password and re-enter it
for confirmation.
4. When completed, click
“Next”.
To Next Page
Loading...