What to do if Conceptronic ZEUS 01E outlets do not provide power to equipment?
If the Conceptronic UPS outlets aren't providing power, it could be due to a tripped circuit breaker from an overload, or discharged batteries. Try turning the UPS off, unplugging some equipment, and unplugging the UPS power cord. Then, press the circuit breaker knob. If that doesn't work, let the unit recharge for at least 4 hours.
Why my Conceptronic UPS will not turn on?
If your Conceptronic UPS won't turn on, there are a couple of things to check. First, the on/off switch is designed to prevent damage from rapid cycling, so turn the UPS off, wait 10 seconds, and then try turning it on again. Also, ensure the unit is properly connected to a 230Vac 50/60Hz outlet.
General| Brand | Conceptronic |
|---|---|
| Model | ZEUS 01E |
| Category | UPS |
| Language | English |
Details on front and rear panel components: Power Switch, LED Indicator, USB port, Modem/LAN protection, and Input Circuit Breaker.
Description of input power cord and battery backup/surge protected outlets for continuous power.
Explanation of LED status and audible alarms for ZEUS 01E/02E, and LCD indicator definitions for ZEUS 03E/04E.
Step-by-step guide for connecting and setting up the UPS unit, including battery charging and overload handling.
Procedure for downloading and installing the Power Master management software for system monitoring.
Important warnings to prevent fire, electric shock, and damage from hazardous voltage.
Notes on operating environment and intended use of the UPS with computer loads only.
Addresses issues like unexpected runtime, failure to turn on, and lack of power to outlets.
To Next Page