Concord Camera Eye-Q 3340z - Taking Pictures; Taking a Picture with Viewfinder or LCD; Setting the Flash Mode

TAKING A PICTURE
Taking a picture with the viewfinder or LCD:
1. Turn the camera on.
2. Set the camera to ( ) Camera Mode. (fig.1.1)
3. Frame the subject in the viewfinder or LCD.
4. Press the shutter button half-way to activate the auto-focus until the green AF LED
stops blinking. (fig.1.2)
5. Press the shutter button fully to capture the image. (fig.1.3)
SETTING THE FLASH
1. Press the Flash button next to the LCD repeatedly until the desired mode appears on
the LCD.
5
TAKING PICTURES
O K
O K
fig.1.2
fig.1.3
fig.1.1
O K
O K
: Auto Flash

: Red-Eye Reduction

: Fill-in Flash

: Flash off

: Night Mode
A
A
En
Kimba QS Guide-6L(513734-00) 11/1/03 10:09 AM Page 5