CONCORD Sleeper 2.0 - Using Your Concord Sleeper Carrycot on the Pushchair; Maintenance

•Taketheupholsteryoffthebackrestandpassthe
shoulder
 strapsthroughtheslots.
•Pullthemattressandtaketheupholsteryoffbyopening
 thecentralpart.
Washbyhandatatemperatureneverhigherthan30°C.
Torefitthecover,followthesamestepsinreverseorder.
CONCORDSLEEPERcanbeanchoredonanyCONCORD
chassisthathasthePRO-FIXsystem.
Tofitthesafetyseatonachassis,inserttheconnections
(06)inthecavityofthechassisandpressuntilyouheara
click.
ToreleaseyourCONCORDSLEEPERfromthechassis,
pressthebutton(03)onthehandle(01)andpulltheseat
upwards.
_ USING YOUR CONCORD SLEEPER CARRYCOT ON THE PUSHCHAIR
3534
Donotexposethecovertosunlightforlongperiods.When
theseatisnotinuse,coveritorstoreitintheboot.
Washtheplasticpartswithwarmwaterandsoap,carefully
dryingallthecomponentsafterwards.
Theupholsterycanberemovedforwashing.
Followtheinstructionsbelow:
•Removetherubberbandsthatgounderneaththe
 carseatbeltfasteners(05)andundotheclaspsfromthe
 other.
•Alsotheplasticflapsthatareonthesidesofthecarrycot.
•Removetheupholsteryfromtheedgesofyour
 CONCORDSLEEPERcarrycot.
•Undothesafetyharnessclaspandpassitthroughtheslot
 inthemattressupholstery.
_ MAINTENANCE