CONCORD Sleeper 2.0 - Prior Adjustments; Changing the Position of the Handle; Reclining the Backrest; Ventilation Channels

Changing the position of the handle
Thecarryinghandle(01)has2positions,eachoneofthem
hasaspecificfunction:
Position1:Hoodfolded.
Position2:Carryingposition.Positionforfittingand
removingthecarrycotfromaCONCORDchassisandfor
carrying,aswellasforuseinthevehicle.
Tochangetheposition,pressthedoublesafetycatchand
thenthelever(02)onthehandleandturnthehandle(01)to
therequiredposition.
2726
Reclining the backrest
Thebackrest(14)ofthenewCONCORDSLEEPERcarrycot
canbeautomaticallyadjustedusingtheadjustmentdevice
(16).Therearetwocleardifferentpositions:
Position1-AUTO:Thebackrestwillalwaysbeinthelowest
position,withthebabyalwayslyingdownduringthejourney.
Position2-STROLLING:Thebackrestcanbereclinedbyup
to20ºwhenitisinstalledonyourCONCORDpushchairor
outofthecar.
Ventilation channels
Pressingthebutton(09)onthelowerpartoftheheadarea
givesyoutwoextraventilationchannelsforthehottest
seasons.
_ PRIOR ADJUSTMENTS