Need help?Do you have a question about the CONDTROL XLiner Pento 360 and is the answer not in the manual?
General| Wavelength | 635 nm |
|---|---|
| Self-Leveling Range | ±4° |
| Accuracy | ±0.2 mm/m |
| Power Supply | 4 x AA batteries |
| Operating Time | 8 hours |
| IP Rating | IP54 |
| Operating Temperature | -10°C to +40°C |
| Laser Class | 2 |
| Leveling Time | ≤3 seconds |
| Laser Type | Red |
Details about the 7.4V 2600mAh Li-ion battery power source.
Instructions on installing and charging the device's battery.
How to use the automatic leveling feature.
Instructions for projecting inclined planes using the laser.
Procedure to check the horizontal accuracy of the laser level.
Procedure to check the vertical accuracy of the laser level.
To Next Page
