Need help?Do you have a question about the CONDTROL XLiner Pento 360G and is the answer not in the manual?
General| Working range | 30 m |
|---|---|
| Self-levelling range | ±4° |
| Levelling accuracy | ±0.2 mm/m |
| Laser type | 635 nm, <1 mW |
| Power supply | 4 x AA batteries |
| Mount thread | 1/4" |
| Protection class | IP54 |
| Accuracy | ±0.2 mm/m |
| Battery Type | 4 x AA batteries |
| Laser class | Class 2 |
| Operating temperature | -10°С to +50°С |
| Storage temperature | -20°C to +70°C |
Details about the laser level's power source and battery.
Instructions for installing and charging the Li-ion battery.
How to switch on the laser level and select automatic leveling mode.
How to use the laser for projecting inclined planes.
Procedure to check the accuracy of the horizontal laser line.
Procedure to check the accuracy of the vertical laser line.
To Next Page
