2
What’s in the box:
1. MRCC – MIDI Router Control Center
2. International AC Power Supply
3. AC Outlet/Mains Adapters
4. USB Type A to B Cable
5. This Quick Start Guide
6. Optional accessories (if ordered)
Power Supply Specifications:
Input: 100 to 240V AC, 50/60Hz
Output: 5.25V DC, 3A, USB Type C connector
MRCC Power Consumption:
MRCC alone uses a minimum of 26mA, and up to 990mA primarily
depending on how many LEDs are lit and their brightness. Each USB A
Host Port supports up to 500mA as per USB 2.0 specification.
The MRCC is compatible with most USB-PD (Power Delivery)
specification power supplies with a 5V DC, 15W (minimum) rating. MRCC
will operate correctly down to 4.5V DC, but USB 2.0 devices are only
required to operate down to 4.75V. MRCC absolute maximum input is
5.5V DC. Higher voltages will cause damage that is not covered by
warranty. When using a 3
rd
party power supply, use the shortest USB
cable possible to prevent voltage drop.
To Next Page
