3
Precautions, not limited to:
1. Read and follow all instructions.
2. Unplug before cleaning and use only a soft dry cloth. Do not use any
cleaners, it could damage the silkscreen ink.
3. Do not use the instrument near water or moisture, such as a bathtub,
sink, swimming pool or similar place.
4. Do not expose the instrument to hot sunlight.
5. Do not spill any kind of liquid onto the instrument.
6. Do not place the instrument in an unstable position where it might
accidentally fall. Do not place heavy objects on the instrument.
7. Do not open or insert anything into the instrument that may cause a
fire or electrical shock.
8. Always contact Conductive Labs LLC if you have an issue. You will
invalidate your warranty if you open and remove the cover. However,
you may exchange the end caps for rack ears.
9. Do not use the instrument when there is a gas leak nearby.
10. Conductive Labs LLC is not responsible for any damage or data loss
caused by improper operation of the instrument.
11. The MRCC RJ45 port is NOT ETHERNET. Do not attach any Ethernet
devices to MRCC, it may damage MRCC and/or the Ethernet device.
Not following the above Precautions will void the manufacturer’s
warranty.
To Next Page
