What to do if my ConMed Linvatec Electric Shaver handpiece does not operate?
If the handpiece of your ConMed Linvatec Electric Shaver isn't working, first ensure the handpiece cord is securely connected to the controller. If the problem persists, the handpiece may be faulty and should be returned for service.
What to do if the 'CONNECT HANDPIECE' message appears on my ConMed Linvatec Electric Shaver?
If you see a 'CONNECT HANDPIECE' message on your ConMed Linvatec Electric Shaver, even when the handpiece is plugged in, try these steps: * Ensure the handpiece is securely connected to the controller. * If the message still appears, the handpiece or system may be faulty. Replace the handpiece; if this fixes the issue, return the old handpiece for service. Otherwise, return the entire system for service.
Why does my ConMed Linvatec D4240 show 'MOTOR OVER SPEED', 'HP SERVICE REQUIRED', or 'CANNOT ID HANDPIECE'?
The 'MOTOR OVER SPEED', 'HP SERVICE REQUIRED', or 'CANNOT ID HANDPIECE' messages on your ConMed Linvatec Electric Shaver indicate a fault with the handpiece or system. Try replacing the handpiece. If this resolves the issue, return the handpiece for service. If not, the system itself needs servicing.
Provides critical safety information, warnings, and precautions for equipment use.
Details the step-by-step process for inserting and removing shaver blades or burs.
Explains how to control suction, use buttons, and operate in different modes.
Outlines the necessary functional tests to perform before using the shaver handpiece.
Provides step-by-step instructions for manually cleaning the shaver handpiece and attachments.
Details the instructions and parameters for steam sterilization of shaver handpieces.
Provides a guide for troubleshooting common symptoms and error messages.
General| Brand | ConMed Linvatec |
|---|---|
| Model | D4240 |
| Category | Electric Shaver |
| Language | English |
To Next Page
