What to do if my ConMed Linvatec D9824 Electric Shaver handpiece does not operate?
If the handpiece of your ConMed Linvatec Electric Shaver isn't working, first ensure the handpiece cord is securely connected to the controller. If the problem persists, the handpiece may be faulty and should be returned for service.
What to do if the 'CONNECT HANDPIECE' message appears on my ConMed Linvatec D9824?
If you see a 'CONNECT HANDPIECE' message on your ConMed Linvatec Electric Shaver, even when the handpiece is plugged in, try these steps: * Ensure the handpiece is securely connected to the controller. * If the message still appears, the handpiece or system may be faulty. Replace the handpiece; if this fixes the issue, return the old handpiece for service. Otherwise, return the entire system for service.
Why does my ConMed Linvatec D9824 show 'MOTOR OVER SPEED', 'HP SERVICE REQUIRED', or 'CANNOT ID HANDPIECE'?
The 'MOTOR OVER SPEED', 'HP SERVICE REQUIRED', or 'CANNOT ID HANDPIECE' messages on your ConMed Linvatec Electric Shaver indicate a fault with the handpiece or system. Try replacing the handpiece. If this resolves the issue, return the handpiece for service. If not, the system itself needs servicing.
Provides critical safety information and precautions for safe and effective use of the equipment.
Details critical safety information regarding adverse reactions and potential hazards.
Outlines special care instructions for safe and effective equipment use.
Guides the user on how to assemble and install the shaver handpieces and accessories.
Provides step-by-step instructions for attaching and detaching shaver blades or burs.
Explains how to operate the shaver handpieces using buttons or a footswitch.
Outlines the necessary tests to perform before using the handpiece.
Lists important warnings and precautions related to cleaning procedures.
Highlights crucial warnings and precautions for sterilization processes.
General| Brand | ConMed Linvatec |
|---|---|
| Model | D9824 |
| Category | Electric Shaver |
| Language | English |
To Next Page
