Connect IT CEP-9100-BK - Technical Specifications

EN
USER MANUAL
BLUETOOTH EARPHONES
CEP-9100-BK • CEP-9100-SL
CEP-9100-RD • CEP-9101-GD
1 Technical specifications
 Bluetooth chip: RTL8763BFR
 Bluetooth version: V5.0
 Bluetooth profiles:
 A2DP (Advanced Audio Distribution Profile) … stereo-quality music
  AVRCP (Audio/Video Remote Control Profile) … music reproduction controls
 HSP (Headset Profile) … transmission of phone calls
 HFP (Hands-Free Profile) … phone call controls
  Frequency: 2.402 – 2.480 GHz
  Range: up to 10 m
  Frequency scope: 20 Hz - 20 kHz
  Impedance: 16 Ohm ±15%
  Bluetooth sensitivity 98 ±3 dB
  Earphone power consumption: 3 mW
  Microphone sensitivity: -42 ±3 dB
  Headphone battery: 3.7 V / 50 mAh (Li-Ion)
  Charging case battery: 3.7 V / 500 mAh (Li-Ion)
  Battery time: up to 6 hours for a single earphone, up to 5 hours for a pair
  Standby time: up to 50 hours for a single earphone, up to 100 hours for a pair
  Number of full earphone charges from a fully charged charging case: 4×
  Standby time for the charging case: 300 hours
  Input parameters for the charging case: 5 V / 0.5 – 1 A
  Output parameters for the charging case: 5 V / 500 mA
  Earphone recharge time: about 1.5 hours
  Charging case recharge time: about 2.5 hours
  Earphone dimensions with M earpads (w x d x h): 25 ×24 × 16.5 mm
  Earphone weight (including silicon M earpads): 2x 4.5 g
  Charging case dimensions (w x d x h): 75 ×35.5 × 32 mm
  Charging case weight without earphones: 37 g
  Charging case weight with earphones: 46 g