Conquer 530-TRNRFLUID User Manual (English)

To Next Page

Product name: Conquer Fluid Resistance Bicycle

Trainer Indoor Exercise Bike

SKU: 530-TRNRFLUID

EMAIL: customercare@conquerequipment.com

TEL: 855-349-4327

help.ConquerEquipment.com

EMAIL: customercare@conquerequipment.com WEB: help.conquerequipment.com TEL: 855-349-4327

Conquer Fluid Resistance Bicycle Trainer Indoor Exercise Bike

*Review and follow instructions prior to each use, and keep with trainer for future reference.

*Use the product only as described in this manual.

*Before each use, inspect the trainer and bicycle to ensure safety.

*Refer to manual for any questions. If you are unsure of use or have warranty inquiries,

please visit help.conquerequipment.com.

1. Remove all packaging, unfold the frame (A), and place on a level floor.

2. Replace your bicycle’s rear wheel quick-release skewer with the silver skewer

included with the cycling trainer (G). This is to make your bike properly fit the trainer, for

stability and for safety.

Need help?

Do you have a question about the Conquer 530-TRNRFLUID and is the answer not in the manual?

Conquer 530-TRNRFLUID Specifications

General

Identifies key parts like frame, resistance unit, adjustment knob, mounting bolt, tools, skewer, and riser block.

Instructions to unfold the frame, place it on a level floor, and replace the bicycle's skewer.

Use screws to attach the resistance knob bracket to the trainer frame.

Thread bolt through frame/bracket and unit, then fasten with nut and tighten.

Mount rear wheel between couplings, tighten, and ensure tension knob contacts tire correctly.

Place riser block under front wheel and adjust tension knob for desired resistance.

Release roller tension and loosen couplings to detach the bicycle from the trainer.

Notes on bike compatibility, skewer length, and using mats/slick tires to reduce noise.

Critical warnings on setup surface, braking, part integrity, pets, pinching, moving parts, tire security, and user conduct.