Conquip Trench Box - Product Overview; Trench Box Description

3
User Guide - Trench Box
Product Information
Overview
The Conquip 3.5m Trench Box is a simple to assemble, two sided trench lining
support system designed to be installed by an excavator using the ‘dig and push’
technique, or by simply carrying out the excavaon and then lowering each box
into place.
The Trench Box is normally selected for installing ulity pipes where ground
movement is not crical. The size of the system required depends on maximum
trench depth requirements and the size of pipe secons. Extensions available for
trench depths of up to 5.18 metres and widths of up to 4 metres.
Manufactured in the UK from quality Brish and EU steel.
Conquip also supply a full range of suitable liing and extracon chains, edge
protecon and trench access accessories.