CONRAD MEIER COMPACT VAC - Filter Care and Storage; Cleaning the Filter; Maintenance Schedule; Storage Instructions

Conrad Meier
™
Compact Vac With Multicyclonic Technology Page 13Page 12 Conrad Meier
™
Compact Vac With Multicyclonic Technology
Cleaning the Filter
Clean with a soft brush.
IMPORTANT:
The Filter can also be cleaned by rinsing with warm water. However, it must
air-dry for 24 hours and be completely dry before being placed back in the
Vacuum.
IMPORTANT:
It is usually necessary to clean or replace all Filters after 3 months use to
maintain the suction strength of the Vacuum.
Maintenance
Any maintenance should only be done when the Power Cord is unplugged.
Before each use, check for blockages in the Telescopic Tube and Hose.
Clean the lters every 3 months of use. Replace if necessary.
Clean the outside of the Vacuum with a microbre cloth or clean, slightly damp
cloth.
WARNING:
Never use abrasives or petrochemicals to clean the vacuum.
Storage
Open the Accessories Holder and wrap the Hose around the body of the
vacuum (Fig 8). Return the Upholstery Brush and Crevice Tool to the
Accessories Holder (Fig 8).
Always store the vacuum in a cool, dry place away from direct sunlight.
Unplug the Power Cord. To rewind the power cord press the Retract Button.
Guide the cable with your other hand to make sure the Power Cord does not
whip. Hang the Vacuum Head Hook on the Vacuum Head Holder (Fig 9).
(Fig. 8).
(Fig. 9).