EasyManua.ls Logo

Conrad TE 857 - B) Second Receiver Unit; C) Temperature;Humidity Sensor; D) Rain Sensor; E) Wind Sensor

Conrad TE 857
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
64
b) Second Receiver Unit
• Radio-controlled DCF time/date display, manual setting possible
• 12/24 hr time format
• 5 languages can be selected for displaying the day of the week
• Display of the indoor temperature/humidity
• Display of the outdoor temperature/humidity (reception of up to 3 outdoor sensors possible)
• Temperature display in Celsius (°C) or Fahrenheit (°F, selectable)
• Min/max memory for indoor/outdoor temperature and indoor/outdoor humidity
• Trend display for indoor/outdoor temperature, indoor/outdoor humidity
• Alarm clock function with pre-alarm (for low outdoor temperatures)
• "Battery empty" display for the weather station and all sensors
• Installation on a table or mounting on a wall
• Operation via two AA/mignon batteries
• Operate in dry rooms
c) Temperature/Humidity Sensor
• Integrated LC display for the temperature/humidity
• Wireless signal transmission (443 MHz)
• Operated with 2 AA/mignon batteries
• Installation on a table or mounting on a wall
• Selection of 5 different channels
• Operation in protected outdoor locations (e.g. underneath eaves)
d) Rain Sensor
• Measuring of amount of rain
• Wireless signal transmission (443 MHz)
• Operated with 2 AA/mignon batteries
• Protective grille (against leaves falling in)
• Mini water level inside, for easy alignment when installing on a level surface
• Outdoor operation
e) Wind Sensor
• Measuring wind direction and speed
• Wireless signal transmission (443 MHz)
• Operated with 2 AA/mignon batteries
• Integrated solar cell and NiMH batteries to increase battery life
• Can be installed to a wall (or to a pole)
• Outdoor operation

Table of Contents