Conrad wh1070 - User Manual

162 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Version 12/06

 Funk-Wetterstation

WH1070

Seite 4 - 42

 Radio weather station

WH1070

Page 43 - 80

 Station météo sans ﬁl

WH1070

Page 81 - 121

 Radio-weerstation

WH1070

Pagina 122 - 160

Best.-Nr. / Item-No. / N

o

de commande / Bestnr.: 64 62 67



BEDIENUNGSANLEITUNG



OPERATING INSTRUCTIONS



NOTICE D’EMPLOI



GEBRUIKSAANWIJZING

Table of Contents

Questions and Answers

J
Jason CallahanJul 31, 2025
Why does my Conrad Weather Station base station not always receive data from the outdoor sensors?
- P
  Peter RuizJul 31, 2025
  If your Conrad Weather Station base station isn't consistently receiving data from the outdoor sensors, there might be interference affecting the reception. Refer to the manual section on 'Range and Reception problems' and 'Outdoor sensor', and try replacing the batteries. It could also be a matter of radio range; try repositioning either the base station or the outdoor sensors to improve signal strength.
D
Darius JohnsonAug 14, 2025
What to do if my Conrad wh1070 base station shows strange characters?
- C
  Charles GrayAug 14, 2025
  If your Conrad Weather Station's base station displays unusual characters or incomplete segments, the device may be in a 'quit' state. To resolve this, remove the batteries from the base station and wait approximately 10 minutes. Then, reinsert the batteries as described in the 'Battery Replacement' section of the manual.

Summary

Features and Functions

Base Station Capabilities

Safety Instructions and Battery Use

General Safety Warnings

Highlights critical safety precautions for operating the device and avoiding hazards.

Battery Handling and Safety

Provides essential guidelines for battery insertion, handling, and safety to prevent damage or injury.

Display and Control Elements

Base Station Display Indicators

Initial Operation and Setup

Setting Up and Mounting

Base Station Installation

Provides guidance on selecting a site and mounting the base station, including wall mounting and table setup options.

Outdoor Sensor Installation

Explains how to attach the wind, rain, and temperature/humidity sensors to the sensor post.

Sensor Post Placement

Display and Operation Modes

Time and Calendar Display

Indoor and Outdoor Measurement Displays

Weather Forecast and Trend Display

Air Pressure, Wind, and Rain Data

History, Storm Warning, and Min;Max Functions

Details the history function, storm warning, and minimum/maximum value logging.

Configuring the Display

Device Settings

Unit and Threshold Settings

Covers setting temperature units, air pressure units, relative air pressure, and thresholds for weather forecasts.

Wind and Rain Units Configuration

Alarm Functions

Setting Alarm Values

Guides on setting up high and low alarms for various indoor and outdoor weather parameters.

Wake-up and Weather Alarms

Explains the wake-up alarm and how weather data alarms are triggered and indicated.

Replacing Batteries

Troubleshooting Common Issues

Range and Reception Disturbances

Conrad wh1070 Specifications

General

Brand	Conrad
Model	wh1070
Category	Weather Station
Language	English

Related product manuals