77
wherever batteries/accumulators are sold!
You thus fulfil the legal requirements and make your contribution to the
protection of the environment!
19. Troubleshooting
By purchasing this system you have acquired a product that has been designed to
the state of the art and is operationally reliable.
Problems and malfunctions may, however, still arise.
We would therefore like to describe how you can eliminate certain malfunctions your-
self.
Always follow the safety instructions carefully.
Problem Possible cause Error remedy
Base station cannot Disturbances in reception See the chapter „Range and
always receive Reception problems“
the outdoor sensors and „Outdoor sensor“
Batteries are flat Replace the batteries!
Radio range Change the location of the base
station or the outdoor sensors
The base station The device is Remove the batteries from the
shows strange „quit“ base station and wait approx.
characters or not all 10 Minutes. Then proceed as
segments of the described
in the chapter
display
„Battery Replacement“.
The contrast Batteries are weak Change the batteries in the
of the display is base station. Then proceed as
weak described in the chapter
„Battery Replacement“ .
The data of the Disturbances in reception See the chapter „Range and
outdoor sensors of the outdoor sensor data Reception problems“
cannot be The batteries in the Change the batteries in the
received. Temperature/air humidity Temperature/air humidity sensor.
The display of sensor are spent Then proceed as described
base station shows in the chapter „Battery Replace
ment“.
„- -“ or „- - -“
The base station Batteries are flat Check and exchange the
shows wrong the batteries of the
values base station or the temperature/
air humidity sensor. If the
To Next Page
Loading...
