Need help?Do you have a question about the Consilium Salwico Cargo and is the answer not in the manual?
General| Brand | Consilium |
|---|---|
| Model | Salwico Cargo |
| Category | Security Sensors |
| Language | English |
Explains the purpose and scope of the user guide.
Details the approvals related to the system.
Defines various symbols used throughout the manual for clarity.
Outlines maintenance tasks and intervals for the central unit.
Details maintenance procedures for detectors and manual call points.
Covers maintenance for other system components not specifically listed.
Gives a general overview of the analogue-addressable fire detection system.
Illustrates the system's architecture and connected components.
Details the features and operation of the Control Panel M 4.3.
Explains the general functionality and user-friendliness of the panel.
Details the various keys and indicators on the control panel.
Explains how to navigate the system menus and their structure.
Describes the function and features of the Repeater panel.
Provides an overview of the repeater panel's monitoring functions.
Details the keys and indicators present on the repeater panel.
Details the different access levels and their associated permissions for system operation.
Describes the procedure for logging into the system with user credentials.
Details the pre-alarm function, its indicators, and behaviour.
Explains how fire alarms are displayed, handled, and their priority.
Describes the information presented on the panel during a fire alarm event.
Details how to mute a fire alarm and its effects.
Describes the procedure for resetting a fire alarm.
Explains how to navigate and manage multiple active fire alarms.
Specifies how fire alarms from conventional zones are presented.
Explains fault alarms, their display, and handling.
Describes the information presented on the panel during a fault alarm event.
Details how to mute a fault to silence the buzzer.
Describes the procedure for resetting a current fault.
Explains how to reset faults from the fault list.
Details how to reset all present fault alarms in the system.
Explains fault messages and where to find more information.
Explains warning messages and their informative nature.
Explains how to disable system devices and the types of disablements available.
Provides an overview of the disablement function and its security implications.
Lists and describes the four available types of disablements.
Explains the acknowledgement process for a newly entered disablement.
Details the procedure for disabling conventional and addressable zones.
Explains how to disable individual addressable detectors and manual call points.
Details how to disable alarm devices like bells and buzzers.
Describes how to reactivate previously performed disablements.
Explains the alarm delay function and its programmability.
Details how to reconnect disabled items and alarm delays.
Explains how to reconnect disabled system items.
Describes how to reconnect periodic disablements.
Details how to reconnect activated alarm delays.
Explains how to reconnect disabled alarm delays.
Details how to remove all active disablements from the system.
Explains the functions and access levels of the service menu.
Provides an introduction to the service menu and its capabilities.
Details the procedure for saving system logs to a USB memory stick.
Provides guidelines for reporting system faults to an authorized service office.
Provides general information and cautions regarding system testing procedures.
Explains the system's test mode function and its behaviour.
Details the procedure for putting a fire-detecting zone into test mode.
Lists recommended equipment for performing system tests.
Explains how to return a tested zone to its normal condition.
Describes how to test the control panel display and indicators.
Lists fault codes, their causes, remedies, and failure classifications.
Provides definitions and abbreviations used throughout the fire detection system manual.
To Next Page