Need help?Do you have a question about the Consilium CFD5000 T/CM2.2 and is the answer not in the manual?
Details about the purpose and scope of the Installation & Commissioning Manual.
List of related technical product manuals for the CFD5000 T fire detection system.
Explanation of symbols used to convey warnings, cautions, and notes.
Guidance for handling fire and fault alarms on the control panel.
Measures to improve safety and reduce risks during system operation.
Overview of the CFD5000 Fire Detection System and its components.
Technical specifications and data for the CFD5000 fire detection system.
Sequence for performing electrical installation tasks for the system.
Details on cable categories, separation, shielding, and earthing.
Specifics for installing central equipment, including terminal layout.
Sequence for performing mechanical installation tasks for the system.
Guidelines for installing control panels and their environmental requirements.
Information on connecting loop units to the loop-line and environmental requirements.
General guidelines for installing various types of loop units.
Checklist for inspecting the electrical and mechanical installation.
Procedure for testing loop cable resistance and integrity.
Steps for checking loop units, including address verification.
Prerequisites and required equipment for system commissioning.
Procedure for verifying loop connectivity and system status.
Instructions for setting address and layout for Repeater M4.3.
Procedures for testing various system components and detectors.
List of fault codes, their causes, remedies, and failure classifications.
Information on setting the ID for address units.
Recommendations for SSP installation and termination.
Description of system modules and a connection example.
Glossary of terms and abbreviations used in the manual.
Procedure for updating the Consist ID for SDTv2 communication.
Table showing compatible software versions for modules and loop units.
General| Operating Voltage | 10 - 30 VDC |
|---|---|
| Alarm indication | Red LED |
| Operating Temperature | +70°C |
| Air Humidity | 0-95% RH (non-condensing) |
| Power Supply | External power supply required |
To Next Page