EasyManua.ls Logo

Consilium CFD5000 T/CM2.2 - About Testing; Recommended Test Equipment and Procedures; Approved Test Equipment; Heat Detectors

Consilium CFD5000 T/CM2.2
110 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation & Commissioning Manual 8Commissioning
5100607_CFD5000 T - CM2.2_Installation & Commissioning Manual_T_EN_2023_F
49
CAUTION!
Communication problems on a loop due to high external electromagnetic
interference have to be addressed as soon as possible in order to secure the
functionality of the complete fire detection system.
It is highly important to eliminate or reduce any external interference to restore
communication on the loop.
After installation of the Fire detection system, test the different parts of the system
to assure that they function properly.
8.4.2 About testing
CAUTION!
Check for contaminated detectors. Use the Control panel menu system to display a
list showing in which condition the detectors are.
For additional information about testing, please refer to the Service and
Maintenance Manual.
8.4.3 Recommended test equipment and procedures
8.4.3.1 Approved test equipment
Table 4. List of recommended test equipment for fire detection systems
Product Description Part no.
Testifire Multi-stimulus detector tester for smoke
and heat detectors
5200112-00A
Salwico Solo 330 Smoke detector tester N1738
Smoke Sabre Aerosol smoke detector tester 5100508-00A
Salwico Solo 461 Heat detector tester N1743
Salwico IR Test lamp IR flame detector tester 5100553-00A
Salwico UV Test lamp UV flame detector test lamp 1155
W8066 UV test lamp UV flame detector test lamp 1150
Test key for manual call
point
A test key is supplied with each call point NA
CD-FS 301 Flame
Simulator
Visual flame and IR Flame Detector tester 5100791-00
Plastic detector cap A plastic detector cap delivered with each
smoke detector
5200386-00A
For detailed information, please refer to the data sheets for the products.
8.4.3.2 Heat detectors
NOTE!
Use appropriate test equipment, available at your authorised dealer. This is
especially important when testing a heat detector in a hazardous (Ex-classified)
location/area. See section Approved test equipment, page 49.
To test heat detection use either Testifire or Solo461:

Table of Contents

Related product manuals