Consilium CFD5000 T/CM2.2 - Dismounting of Modules on a DIN Rail; DIN Rail Module Support

Installation & Commissioning Manual 6Mechanical Installation
5100607_CFD5000 T - CM2.2_Installation & Commissioning Manual_T_EN_2023_F
33
6.7.2.3 Dismounting of modules on a DIN rail
1. Pull the modules apart leaving the module free.
2. Pull the metal locking in the bottom of the module downwards and lift the module.
Figure 20. Module metal locking
Screw type: N/A.
Tooling: Flat head screwdriver.
Torque: N/A.
6.7.3 DIN rail module support
6.7.3.1 General information
This section is intentionally left blank and may be replaced
by project specific product information.