Need help?Do you have a question about the Consilium SELUX ST and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Range | Up to 96 nautical miles |
| Antenna Rotation Speed | 24 or 48 rpm |
| Transmitter Type | Solid State |
| Weather Resistance | IPx6 |
Highlights dangers associated with high voltage, X-ray, and radio-frequency radiation during operation and maintenance.
Outlines essential safety rules, operating procedures, and necessary precautions to prevent injury.
Provides a summary of general safety precautions and information on resuscitation techniques.
Provides guidelines for the correct installation of shipborne radar equipment for optimal performance and safety.
Discusses managing interference from other sources and optimal placement of radar antennas.
Details system specifications, including dimensions, weight, power, and input/output requirements.
Covers connections for Gyrocompass, Speed Log, EPFS, AIS, and VDR systems.
Details configurations for multiple serial interface lines (RS422/RS232) used for data communication.
Details specifications for Serial Line 1 (THS, HDT) and Serial Line 2 (VDM, VDO, ALR).
Details specifications for Serial Line 3 (ZDA, GLL, GGA) and Serial Line 4 (VBW, VHW).
Details specifications for Serial Lines 5, 6, and 7, including RS422/RS232 data transmission.
Provides a summary of serial input/output ports on the Antares PCB, including type and baud rate.
Explains how to access the Radar Configuration menu and perform initial setup procedures.
Covers configuration for Gyrocompass, Speed Log, and Antenna settings.
Details TXRX settings, transceiver communication types, video, and trigger adjustments.
Covers display resolution, IP addressing, system configuration, and USB memory operations.
Covers stored parameters, software upgrades, and general debugging information.
Introduces simulation facilities and explains video bank selection for analysis.
Details using the debug display for system messages and tracking functions.
Provides an introduction to troubleshooting, safety precautions, and required tools for maintenance.
Details procedures for replacing damaged components, categorized by unit and assembly.
Step-by-step instructions for replacing parts in the Display Core Unit, Monitor, and Keyboard Units.
Lists replaceable parts, their specifications, quantities, and estimated system lifetime.
Illustrates various system configurations with block diagrams showing component interconnections.
Provides outline drawings, dimensional data, and cable lengths for SELUX ST system components.
A checklist for verifying system installation parameters, including compass, speed log, and antenna settings.
Details on-board TXRX settings and radar console configurations for optimal performance.
To Next Page