Consonance D-linear15

To Next Page

D-linear15

Power Conditioner (EU standard)

USER GUIDE

Congratulations on your new CONSONANCE!

Our products are based on a simple philosophy:

The component shall reproduce the original musical sound, purely and naturally.

The products are easy to operate and are manufactured according to the best quality

principles.

All CONSONANCE products are created with acoustical instruments in a concert

situation as point of reference. The music is reproduced exactly like the original and is

limited only by the quality of the recording.

CONTENTS

Technical description p. 2

General use p. 3

Cleaning p. 4

Technical specifications p. 4

Warranty p. 5

Main Page

Need help?

Do you have a question about the Consonance D-linear15 and is the answer not in the manual?

Summary

GENERAL USE

Power Up Meter

The meter displays AC input voltage and warns for over/under voltage conditions.

AC Power Switch

The ON/OFF switch controls the main power supply to the unit.

AC Power Plug

This is the connection point for the main AC power input to the device.

AC Outputs for Amplifiers

Four output sockets designed for connecting power amplifiers and integrated amplifiers.

AC Outputs for Analog Source

Two output sockets specifically for pre-amplifiers and phono stages.

AC Outputs for Digital Source

Four output sockets for connecting CD players, digital stream players, and DACs.

CLEANING

TECHNICAL SPECIFICATIONS

Over Current Protection

The D-linear15 shuts down power to protect equipment if it draws excessive current.

Over Voltage Protection

The unit will shut down power if a dangerous voltage level is detected.

Surge Protection

Protects connected equipment from power surges in the grid.

Lightning Protection

Provides protection against damage from lightning strikes.

Warranty