Manual Electrophoresis Power Supply, rev. 32/2018
3
Procedure? (not for EV0220)
This is the main menu that is shown after powering up the device and has 3 options (not for EV0220):
1. MANUAL
To start a regular procedure with fixed parameter limits for Voltage, Current, Power and Timer.
See Manual Programming.
2. METHOD
To start a procedure with multiple steps to vary the parameter limits automatically while
running. This method also allows Voltage Gradient settings. See Method Programming.
3. SETUP
To modify the settings of the system, detections and data-logging.
EV0220
• The model EV0220 has no possibility to program methods with multiple steps. The device will start
up immediately in the Manual Programming mode.
• To enter the SETUP of the device, hold ✓ pressed when in the manual programming mode until the
Setup menu appears.
Setup
Use this menu to set the system settings of the power supply for language, display contrast, real time clock,
password, detections, data recording.
System
Language
The power supply has several languages built-in for the communication with the user.
When in SETUP, follow these steps to select LANGUAGE and press ✓:
Select the desired language and press ✓.
To Next Page
Loading...
