Need help?Do you have a question about the Consort EV245 and is the answer not in the manual?
General| Brand | Consort |
|---|---|
| Model | EV245 |
| Category | Power Supply |
| Language | English |
Overview of the instrument's manufacturing and testing process.
Consort bvba contact details and location.
Details the warranty period and conditions for the instrument.
Instructions for returning the instrument for servicing.
Explains SET and RUN/STOP button usage during setup.
Explains SET and RUN/STOP button usage during experiment run.
Critical safety instructions for using high-voltage equipment.
Details the intended use and information shown during startup.
Starts a regular procedure with fixed parameters.
Starts a procedure with multiple steps and gradient settings.
Modifies system, detection, and data-logging settings.
Guides on how to select the instrument's language.
Adjusts the display contrast for readability.
Sets the real-time clock for reports and data recording.
Enables or disables password protection for settings modification.
Configures actions for low current detection.
Configures actions for power failure detection.
Shows memory status and details about logged experiments.
Deletes all logged experimental data from the instrument.
Accesses specific device information and parameter limits.
Guides through verifying, connecting, and switching on the instrument.
Sets voltage, current, power, and timer limits for methods.
Sets timer units, values, and automatic step progression.
Explains how to start, pause, or return to the main menu.
Guides through verifying, connecting, and switching on the instrument.
Sets voltage, current, power, and timer limits for manual runs.
Explains the three fields shown on the display during operation.
Describes the functions of SET, ↑, ↓, and RUN/STOP buttons.
Allows temporary modification of parameters while the experiment runs.
How to pause a running procedure and resume or stop it.
Describes automatic stopping, stopping via RUN/STOP, and post-procedure reports.
Details ground leakage, short circuit, overload, and low current alarms.
Steps to reset the device to factory settings, clearing all data.
Information on installing the USB driver for computer interface.
Details the DIS-3 software for reading logged data via USB.
Explains electrical laws, power supply reaction, and resistance importance.
Guides on keeping constant output and comparing experiment results.
Advice on connecting multiple electrophoresis units to one power supply.
Declares conformity with European directives and standards.
Outlines the warranty period, coverage, and conditions.
Provides company contact details for sales, support, and general information.
To Next Page
