CONTEC MEDICAL SYSTEMS PM50 - User Manual

Provides environmental, power supply, and safety specifications for the monitor.

Details the measurement ranges and accuracy for SpO2, pulse rate, and blood pressure.

Explains the operation of the monitor's buttons for various functions.

Describes the different types and locations of interfaces on the monitor.

Lists the included accessories supplied with the patient monitor.

Instructions for unpacking and verifying the monitor and accessories.

Guidance on how to install the dry batteries into the monitor.

Steps to power on the patient monitor and initiate its operation.

Instructions for connecting the SpO2 sensor probe to the monitor.

Procedure for connecting the NIBP cuff to the patient and monitor.

Details the primary display screen and operational modes of the monitor.

Explains how to access and navigate the system menu for settings.

Explains the principle and function of SpO2 monitoring using pulse oximetry.

Lists essential precautions and warnings for SpO2 and pulse monitoring.

Step-by-step guide for performing SpO2 plethysmogram measurements.

Instructions for proper care, cleaning, and maintenance of the SpO2 sensor.

Overview of the Non-invasive Blood Pressure (NIBP) measurement method.

Guidance on applying the NIBP cuff and performing measurements.

Lists common NIBP messages, their explanations, and causes.

Procedures for maintaining and cleaning the NIBP cuff and monitor components.

Guidelines for safe transportation and storage of the patient monitor.

Explanation of various symbols and signals used on the monitor.

Specifies the system requirements for installing the monitoring software.

Step-by-step instructions for installing the patient monitor software.

Guides users through the process of registering and managing user profiles.

Describes the layout and components of the software's main operating interface.

Instructions on how to properly wear or attach the patient monitor device.

Steps for setting up measurement parameters and plans within the software.

Procedure for downloading measurement data from the device to the computer.

How to select and open patient data files for editing.

Instructions on how to delete unnecessary patient data files.

Guidance on backing up patient data files to prevent data loss.

Details on how to edit recorded blood pressure readings.

Features for editing and visualizing blood pressure trends.

How to view and interpret statistical information from the collected data.

Procedure for editing diagnostic information, patient details, and physician info.

How to adjust and manage sleep and wake periods for data analysis.

Setting up thresholds for blood pressure analysis and recalculation.

Generating and viewing histograms for BP data statistics.

Creating and displaying pie charts for BP data analysis.

Displaying correlation lines for analyzing BP data relationships.

Steps for configuring and printing diagnostic reports.

Accessing the help documentation for the software.