Contest pilot-8 - Page 10

PILOT-8- 8-channel intelligent DMX controller
Page 10
English
3.5 - Inserting steps into your sequence (chaser)
3.6 - Deleting steps from a sequence
3.7 - Deleting a sequence
1 - Switch to program mode by pressing for 3 seconds the RECORD button. The display indicates
LOCK. To unlock the program mode, press 6 times the PROJECTOR SELECTOR button no. 6.
2 - Use the SAVED CHASES buttons to choose the sequence you want to modify.
3 - Press the INSERT/TAP button, the LED will light up.
4 - Use the UP and DOWN buttons to select the step before which you want to insert a new step.
5 - Select the projector for which you want to modify the sequence with the PROJECTOR SELECTOR
buttons.
6 - Use the faders to create a colour or use one of the user colour.
7 - Press the RECORD button, all LEDs will flash to confirm your choice.
8 - Repeat step 4 to 7 to add more steps to your sequence. You can add up to 32 steps per sequence.
The display will indicate FuLL when a sequence has reached its maximum number of steps.
9 - You can then select another sequence and add more steps.
10 - Press the RECORD button for more than 3 seconds to leave the programmation mode.
1 - Switch to program mode by pressing for 3 seconds the RECORD button. The display indicates
LOCK. To unlock the program mode, press 6 times the PROJECTOR SELECTOR button no. 6.
2 - Use the SAVED CHASES buttons to choose the sequence you want to modify.
3 - Press the INSERT/TAP button, the LED will light up.
4 - Use the UP and DOWN buttons to select the step you want to erase.
5 - Press the DELETE/CLEAR button, all LEDs will flash to confirm the suppression.
6 - Repeat steps 4 to 5 to delete more steps from your sequence. The display will indicate nuLL if
there is no step left.
7 - You can then select another sequence and delete more steps.
8 - Press the RECORD button for more than 3 seconds to leave the programmation mode.
1 - Switch to program mode by pressing for 3 seconds the RECORD button. The display indicates
LOCK. To unlock the program mode, press 6 times the PROJECTOR SELECTOR button no. 6.
2 - Use the SAVED CHASES buttons to choose the sequence you want to erase.
3 - Simultaneously press the DELETE/CLEAR button and the sequence button you want to erase.
4 - Repeat steps 2 to 3 to delete more sequences.
5 - Press the RECORD button for more than 3 seconds to leave the programmation mode.