Edition 11/2016 - CG200 OD
SACOME, Document CONFIDENTIEL,
Ne peut être reproduit ni communiqué sans notre accord préalable.
- 18 -
6. ACCESSORIES
• Filter holder support
Fig.6.1 Fig.6.2
Fig.6.3 Fig.6.4
• Notice the two holes under the filter fork support (fig.6-1)
• Unpack the accessory (fig.6.2), which is packed separately within the grinder packaging.
• Insert the accessory into the 2 holes (fig.6.3)
• Place your filter supported by the fingers and the back accessory. (fig.6.4)
To Next Page
Loading...