Continu.us EasyMote - Remote Control System Functions; Reset to Default Setting; Backlight Control

Reset to Default Setting
1. Press and hold the ‘Power’ and ‘Mute’ buttons until the LED indicator illuminates.
2. Press the 'Mute' button once. The LED light will flash four times then extinguish. The remote is now reset.
Turning off the Backlight
1. Press and hold the ‘Mute’ and ‘CH-’ buttons until the LED indictor flashes three times. The Backlight will
extinguish.
2. Repeat step one to re-enable the backlight.