Contour Design RollerMouse Free3 User Manual

Keyboard positioning
Before plugging in the unit take a moment to check the height and
angle of your keyboard, and nd the arrangement that's most
comfortable for you. Use the risers to achieve the correct angle and
height regardless of the type of keyboard you are using. The
spacebar on your keyboard should come just above your rollerbar. To
achieve a proper ergonomic position, the front edge of the keyboard
should be as close to the rollerbar as possible.
The Balance Keyboard is a perfect option for the Free3. Designed
specically for the RollerMouse, the Balance Keyboard sits level with
the rollerbar and can be easily adjusted to a positive, neutral, or
negative tilt.
Negative tilt Neutral tilt
Positive tilt

Contour Design RollerMouse Free3 Specifications

General

Form factor	Ambidextrous
Product color	Black
Ergonomic design	Yes
Surface coloration	Monochromatic
Purpose	Office
Scroll type	Wheel
Buttons type	Pressed buttons
Buttons quantity	9
Device interface	USB Type-A
Scrolling directions	Vertical
Number of scroll wheels	1
Movement detection technology	Rollerbar
Number of programmable buttons	7
Number of movement resolution modes	10
Power source	Cable
Package depth	520 mm
Package width	140 mm
Package height	45 mm
Package weight	1060 g
Number of risers	4
Master (outer) case width	340 mm
Master (outer) case height	255 mm
Master (outer) case length	540 mm
Master (outer) case volume	0.0468 cm³
Master (outer) case weight	11300 g
Harmonized System (HS) code	84716070
Quantity per master (outer) case	10 pc(s)

Weight and Dimensions

Depth	121 mm
Width	489 mm
Height	23 mm
Weight	660 g