Contrive Quad - Product Identification and Components; Internal and Front Panel Identification

© 2000 CONTRIVE • B1401.EN 0211 2 www.contrive.it
INTERNAL LABEL
Please perform the following tasks after receiving the product:
 Inspect the unit for damage. If the product appears damaged upon receipt, contact the shipper immediately.
 Verify receipt of the correct power supply voltage option by checking the label.
 If you have received the wrong model or the device does not function properly, contact your supplier.
FRONT PANEL
INTERNAL
FITTING SCREWS
1
7
POWER SUPPLY FUSE
FLAME SIGNAL BARGRAPH
2
8
TERMINAL BOARD
STATUS DISPLAY
3
9
EXPANSION SOCKET
RESET / SHUTOFF BUTTON
4
DEVICE DATA
QRCODE
ORDER CODE
SERIAL NUMBER