CLEANING AND STORING
4
Waste electrical products must not be disposed of with household waste.
This product should be taken to your local recycling centre for safe treatment.
Always disconnect the appliance from the
main power outlet and ensure the heater has
completely cooled prior to cleaning.
Clean the outside of the heater, by wiping with
a damp lint free cloth. Use a dry cloth to wipe
off any moisture left on the heaters surface.
Regularly check and clean the air intake (refer
page 2) is free of dust and obstructions. Use a
dry cloth to clean the air intake.
Do not use any detergents/solvents or
chemical cleaning agents to clean the heater.
Do not immerse in water, or allow any parts to
come into contact with any liquids.
Make sure that the heater has cooled down
completely before storing. Storing the heater in
its original box is highly recommended.
To Next Page
Loading...
