What to do if my Convair ClimateMaster CM15RW does not run?
If your Convair Air Conditioner doesn't run, first check if it's properly plugged in. Also, verify whether there is a power failure in your location. If the "WATER FULL" error code is flashing, drain the tank as shown in Fig 13. Finally, make sure the room temperature is not below the set temperature.
Why is my Convair Air Conditioner not as cool as it once was?
If your Convair Air Conditioner is not as cool as it once was, check if the filters are dusty or dirty, restricting the airflow. Also, verify that the air inlet or outlet is not blocked. Ensure that the room temperature is not below the set temperature.
What to do if Convair ClimateMaster CM15RW Air Conditioner has little effect?
If your Convair Air Conditioner has little effect, ensure there is no direct sunshine; close curtains or blinds. Check if any windows or doors are open. Be aware that more people in the room generate more heat, and something in the room might be producing excessive heat. Also, verify that the exhaust is fitted correctly and not obstructed, ensuring all exhaust air is completely removed from the room.
Why won't the compressor run on my Convair Air Conditioner?
If the compressor on your Convair Air Conditioner won't run, the overheat protection may be active. Wait for it to reset. Note that when switching between modes like cooling to fan or heating, the compressor will turn off, and there will be a 3-minute delay before it restarts.
How to reduce noise from my Convair ClimateMaster CM15RW?
If your Convair Air Conditioner is too noisy, check if it's positioned unevenly, causing vibration. Also, ensure the floor beneath the air conditioner is even.
General| Brand | Convair |
|---|---|
| Model | ClimateMaster CM15RW |
| Category | Air Conditioner |
| Language | English |
To Next Page