convenience concepts BIG SUR HIGH BOY

Need help?

Do you have a question about the convenience concepts BIG SUR HIGH BOY and is the answer not in the manual?

Summary

Step 1: Initial Assembly

Assemble Unit on Side

Assemble the unit laying on its side on a soft surface.

Attach Bottom and Middle Panels

Connect Bottom Panel (6) and Middle Panel (5) to Right Side Panel (3) using dowels and cam locks.

Attach Front Cross Bar

Attach Front Cross Bar (4) to Right Side Panel (3), taking care not to bend it.

Step 2: Add Left Side Panel

Attach Left Side Panel

Attach Left Side Panel (2) to the assembly using wood dowels, cam bolts, and cam locks.

Step 3: Attach Top Panel

Attach Top Panel

Place the unit upright and attach Top Panel (1) using wood dowels, cam bolts, and cam locks.

Step 4: Prepare Doors

Attach Door Hinges

Attach Door Hinges (F) to Doors (7) using Medium Screws (E), being careful not to overtighten.

Step 5: Install Doors and Knobs

Attach Doors to Unit

Attach the Doors (7) to the unit using Medium Screws (E).

Attach Knobs to Doors

Attach Knobs (G) to the Doors using Knob Screws (H) for better alignment.

Step 6: Install Wire Management

Install Wire Cap

Carefully pull apart Wire Cap (J) and align halves with openings in Back Panel (9).

Step 7: Attach Back Panel

Attach Back Panel

Attach Back Panel (9) to the unit using Small Screws (D).

Step 8: Install Shelf

Insert Shelf Supports

Insert Shelf Supports (I) into desired position holes in the side panels.

Slide in Adjustable Shelf

Carefully slide the Adjustable Shelf (8) into the unit onto the Shelf Supports (I).