Need help?Do you have a question about the Converters.TV 925 and is the answer not in the manual?
Operation at 2.970Gbps, 2.970/1.001Gbps, 1.485Gbps, 1.485/1.001Gbps and 270Mbps.
Supports SMPTE 425M (Level A and B), SMPTE 424M, SMPTE 292M, SMPTE 259M-C.
Features equalized/re-clocked loop output, auto video mode detection, and audio output options.
Includes conversion from SMPTE 425M Level B to Level A and 3G SDI to PC/HD signal.
Enables broadcast video signal sending to SDI displays.
Details the front panel controls, including LEDs for signal status and buttons for menu navigation and output selection.
Describes the various input/output connectors on the back panel, including SDI, audio, and power.
Set output timing and resolution for PC and HD displays using D-Sub or RCA connections.
Adjust screen size from Full, Over Scan, Under Scan, Letter Box, or Pan Scan.
Adjust RGB color settings and select SDI audio output groups or mute audio.
Restore factory settings and view input/output information and software revision.
Lists supported SMPTE standards and data transmission rates for SDI signals.
Details input/output port types and the range of video resolutions supported.
Specifies power requirements, ESD protection, and maximum SDI cable lengths.
Provides dimensions, weight, material, operating temperature, and humidity.
Illustrates connecting a camcorder or SDI source to the scaler's input.
Details connecting the scaler's SDI, audio, and PC/HD outputs to displays and audio equipment.
General| Brand | Converters.TV |
|---|---|
| Model | 925 |
| Category | Media Converter |
| Language | English |
To Next Page
