Introduction
The SDI to VGA Scaler with Audio allows SD, HD and 3G-SDI signals to be
display on HD/PC displays while ensuring high bit rates of 2.970 Gbps
gives you fast signal transmission without signal loss. For professional this
means that it is now easier to distribute and extend your SDI signal while
giving you the ability to display your work on the existing PC displays.
Further, the design of coaxial and L/R audio output allows user to output
audio with both digital and analog format and the loop-through 3G-SDI
design also benefit user to enjoy both SDI and PC/HD display
synchronously.
Features
• Operation at 2.970Gbps, 2.970/1.001Gbps, 1.485Gbps,
1.485/1.001Gbps and 270Mbps
• Supports SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE 292M,
SMPTE 259M-C
• Equalized and re-clocked loop output
• Alternative audio output to coaxial and analog 2CH
• Auto video mode detection (3G/HD/SD)
• Conversion from SMPTE 425M level B to Level A for 1080p 50/59.94/60 4:2:2
10-bit
Applications
• Broadcast video signal sending to SDI display
• 3G SDI signal convert into PC/HD signal
To Next Page
