Introduction
The HDMI to SDI converter allows HDMI signals to be display on SDI display. It is
perfectly useful for an high bit rates processing at 2.970Gbit/s which ensure fast
signal transmission without signal loss. Further, the external audio allow user to
play a different audio source instead of the HDMI audio to be display
synchronously without delay on the SDI output.
Features
• Operation at 2.970Gbps, 2.970/1.001Gbps, 1.485Gbps, 1.485/1.001Gbps and
270Mbps
• Integrated audio de-embedding for max 8 channels of 48kHz audio
• Auto video mode detection (3G/SD/HD)
• Conversion from HDMI to SD/HD/3G signal
• Connect with SDI to HDMI converter to extend your signal over long distances
• Supports input signal transmission distances of up to 300M for SD signals, 200M
for HD signals and 100M for 3G signals
NOTE: Cable tested with Belden 1694A. Operating distance may vary if used with
another type of cable.
Applications
• Smart Home/Luxury House
• Smart Building or any Smart AV Installation System
• HDMI signal convert in to 3G SDI display
System
Requirements
Input HDMI source equipment with HDMI cable and output SDI
monitor with SDI cable.
To Next Page
