Owner’s / Installaon Manual
M7204RF Operaon
(1) - buon – For adjusng Down
(2) + buon – For adjusng UP
(3) MENU – Access menu, select items
(4) CAM – Switches between all cameras Connected to Monitor one at a me.
(5) PAIR – Hold for 3sec to enter Pairing Mode
(6) POWER – Turns monitor On and O.
(7) Power indicactor Light.
(8) Loudspeaker
Pressing MENU shows the MAIN MENU. MENU also will select and or change a feature’s ON/OFF status. If a feature is adjustable,
aer selecng it with MENU, use -/+ to adjust.
• -/+ buons adjust Volume. Aer pressing MENU, they will highlight a feature, hit MENU to select that feature, then either
MENU again to toggle on or o, or -/+ to adjust the feature shown.
• To adjust the Aspect Rao from 16:9 to 4:3, select “ZOOM” in the “OPTION ” menu and use “MENU” to toggle one or the oth-
er.
• If installing monitor upside down, select “Rotaon” in the “OPTION” menu and use “MENU” to adjust (LU = le-up, LD = le-
down, RD = right-down, RU = right-up) RU is the normal view, LU is the mirror view. LD and RD if monitor is upside down from
the ceiling.
Pressing MENU will reveal the MAIN MENU page. Use ↕ buons to select a feature, and ↔buons to ad-
just.
• ↔buons adjust Volume. Aer pressing MENU, they adjust the feature shown. Use ↕ buons to select
the feature on a MENU page.
• To adjust the Aspect Rao from 16:9 to 4:3, select “MENU”, “OPTION”, “ZOOM”, then menu will change
it.
• When installing monitor upside down, select Rotaon in the OPTION menu and use MENU to adjust (LU
= le-up, LD = le-down, RD = right-down, RU = right-up) RU is the normal view, LU is the mirror view.
LD and RD if monitor is upside down from the ceiling.
• Video Select buon 1-4 select that camera.
Using the Remote Control
Convoy Technologies Inc.
6409 Highview Drive, Fort Wayne, IN, 46818 USA
To Next Page
Loading...
Need help?
General