Cook-it 2 - Cleaning and Maintenance

Anti-drip function: When taking out the coffee pot from the coffee machine, prevent the
coffee liquid from dripping onto the insulation board;
When you need to take out the coffee pot before the coffee brewing is complete, it is
recommended to choose to suspend the brewing function.
Warning: When brewing coffee, do not touch the overflow hole of the filter cup to prevent
burns from high temperature steam.
Note: When you remove the coffee pot midway through brewing, please return the coffee
pot to the coffee machine within 30 seconds, otherwise the coffee liquid will overflow the
filter cup overflow hole.
ANTI-DRIP FUNCTION
In the basic mode state, long press the "Start/Stop" button for 3 seconds, the buzzer will
sound twice, and only the display board will light up. At this time, long press the left arrow
key and then long press the bean powder key to enter, the digital tube will display OPEN,
after the coffee powder channel is opened, remove the plug from the power socket, remove
the protective cover and grinding knife(top)assembly, and clean the bean grinding cavity
and powder channel with the equipped brush.
POWDER BLOCKING CLEANING FUNCTION
Clean and maintain the grinder
After each grinding of the coffee machine, the coffee powder remains in the grinder bean
chamber and powder channel, affecting the taste of the coffee. In order to maintain the
aroma of coffee and ensure the quality of coffee, it is recommended to clean the coffee
bean grinder once a week.
Clean the lower grinder
If the grinding cavity or powder channel of the grinder is blocked with powder. Please clean
the grinding cavity and powder channel with the equipped brush.
Vacuum the grinding cavity and powder channel if necessary.
CLEANING AND MAINTENANCE