Cook's essentials A18 - Advanced Control Panel Settings; Setting Cooking Temperature; Setting Cooking Wattage; Setting Cooking Time

!
7!
Using the Digital Control Panel Continued
To Set Your Own Cooking Temperature
A. Plug unit into wall outlet. Unit will beep and the display will flash 4 dashes (- - - -), for the
OFF mode.
B. Press the ON/OFF Button. Unit will beep and display ‘on’, for the ON mode.
(If no other button is pressed within 30 seconds, the device will go to the OFF mode.)
D. Press the FUNCTION Button twice. This will select the Temperature FUNCTION.
E. Press the +/- Buttons to raise or lower the temperature to the desired temperature.
F. Cooking will begin at desired temperature.
To Set Your Own Cooking Wattage
WATTS (W)
100
200
400
600
800
1000
1200
1300
1400
1500
COOKING
LEVEL
Simmer-Keep
Warm
Low
Medium-Low
Medium-High
High
A. Plug unit into wall outlet. Unit will beep and the display will flash 4 dashes (- - - -), for the
OFF mode.
B. Press the ON/OFF Button. Unit will beep and display ‘on’, for the ON mode.
(If no other button is pressed within 30 seconds, the device will go to the OFF mode.)
C. Press the FUNCTION Button once. This will select the Wattage FUNCTION.
D. Press the +/- Buttons to increase or decrease the wattage to the desired wattage.
E. Cooking will begin at desired wattage.
To Set Your Own Cooking Time
Once the Cooking Temperature or Wattage has been selected:
A. Press the TIMER Button. The display will show ‘0:00’.
B. Press the +/- Buttons to increase or decrease the time.
C. Cooking will continue and go to OFF once cook time has elapsed.
Note: LED will alternate between Time and Temperature or Wattage.