8 ∙ Prepping Your Butter Sprayer
2 Place 1 - 5 tablespoons of butter into Melting Chamber.
It is recommended to only melt as much butter as will
be needed. This will make cleaning and storing easier!
Prepping Your Butter Sprayer
Prepping Your Butter Sprayer ∙ 9
1 Remove the Cap from the Main Body by unscrewing it
counterclockwise 90 degrees.
3 Lock the Cap back onto the Main Body by screwing
clockwise and aligning the front tabs of the Cap and
Main Body.
4 Plug the charging base into a wall socket. The Power
Indicator Light will illuminate blue. Refer to page 12 for
the 'Charging & Melting Chart'.
5 Place your Butter Sprayer on the Charging Base.
6 The Power Indicator Light on the Charging Base will
change to orange. The Charging/Melting Indicator
Light on the Butter Sprayer will illuminate orange. This
indicates that the Butter Sprayer is melting your butter.
Refer to page 12 for the 'Charging & Melting Chart'.
To Next Page
Loading...
