After every wash
After every wash, turn off the water supply to the appliance and leave the door
slightly open so that moisture and odors are not trapped inside.
Remove the plug
Before cleaning or performing maintenance, always remove the plug from the socket.
No solvents or abrasive cleaning
To clean the exterior and rubber parts of the dishwasher, do not use solvents or
abrasive cleaning products. Only use a cloth with warm soapy water.
To remove spots or stains from the surface of the interior, use a cloth dampened with
water and a little vinegar, or a cleaning product made specifically for dishwashers.
When not in use for a longtime
It is recommended that you run a wash cycle with the dishwasher empty and
then remove the plug from the socket, leave the door of the appliance open.
This will help the door seals to last longer and prevent odors from forming within
the appliance.
Moving the appliance
If the appliance must be moved, try to keep it in the vertical position. If necessary, it can
be positioned on its back.
How to keep your dishwasher in shape
To Next Page
Loading...
